Izdelki za jeklena jekla (678)

500 ore di resistenza alla corrosione in nebbia salina neutra (NSS) ISO 9227 Rating 9 ISO 10.289 Doppio riporto di cromo 25µm+25µm Acciai disponibili:CK45 Acciai disponibili:20MnV6 Acciai disponibili:38MnV6/38MnVS6 Acciai disponibili:42CrMo4+QT

ART. 530 CERNIERE PESANTI A MOLLA A SINGOLA AZIONE IN ACCIAIO Confezione:2 Dimensioni (mm):150 Pollici:6

Helix steel aisi Helical bar in AISI 304 stainless steel, cold drawn, with high mechanical performance, for the reinforced styling of joints and for connections, including through-holes, on masonry, reinforced concrete, arches and vaults. Suitable for the consolidation of structures in seismic areas; advantageous in combination with hydraulic binders (cement and hydraulic lime) and with resin matrix binders, it particularly facilitates the achievement of physical and mechanical performances in combination with Unisan mortar, with those of the REPAR, GROUT family and with the structural resins of the SYNTECH family. The optional accessory Connector Steel Aisi 304, supplied separately on request, allows the connection between the passing helical bar and the helical bar positioned deeply on the stripped joint. Helix Steel AISI 304 bars are available in a range of diameters: 6, 8, 10 or 12 mm, all characterised by their durability even in aggressive environments, their high tensile and shear strength, and excellent flexibility. Such characteristics make the use of these bars particularly advantageous in combination with hydraulic binders (cement, hydraulic lime), air binders (air lime) and resinous matrix binders. Flexibility, handling and versatility with various binder matrices, permit the realisation of rapid, non-invasive reinforcement operations, being easy to apply and with low installation costs. Very high mechanical physical benefits come when combined with our mortars of the REPAR, GROUT and Unisan lines and the structural resins of the SYNTECH line. Reinforcement operations on concrete and masonry structures. Reinforced pointing of joints. Structural one-sided connections or through-holes crossing the entire section. Helical morphology allows optimal gripping on bricks, mortars, stones and on old walls of historical and cultural interest generally. The durability against atmospheric and environmental conditioning makes the use of Helix Steel AISI 304 bars particularly advantageous in the structures affected by the presence of aggressive soluble salts (sulphates, nitrates, phosphates). Reinforced pointing of joints: Deep stripping of joints can ensure the placement of the bar at a depth of a few centimetres from the surface. To remove any loose and crumbly parts (stone, bricks, enticing mortar, etc.). Cleaning and saturation of the substrate with pressure washing. To remove any saline efflorescence by brushing or sandblasting. Connections on masonry, concrete, arches and vaults: Make sure that there are no loose or crumbly parts on the substrate. Stripping of mortar joints. Cleaning and saturation of the substrate with pressure washing. To remove any saline efflorescence by brushing or sandblasting. Reinforced pointing of joints: Reinforced pointing of masonry joints by filling part of the joint profile with an initial layer of Unisan fibre-reinforced composite mortar (see the data sheet), then on the mortar whilst still wet, inserting the Helix Steel AISI 304 bar before covering with a final layer of Unisan mortar. Press the mortar inside the joint, being sure to press well until totally full and flush with the wall. The temperature of the substrate must be between +5° and +35° C. Connections on masonry, concrete, arches and vaults: After carefully preparing the substrate and before applying the first layer of structural mortar (lime- or cement-based depending on the type of operation), wet with water at low pressure until complete saturation, bearing in mind that a lack of saturation may prevent adhesion and cause cracking in the mortar. If necessary, apply a rough coat of Untersana mortar. Proceed with creating holes of a suitable diameter and inclination (at 45° if the operation is undertaken only on one side of the structural element). Before they are bent in anticipation of the mesh, the connectors emerge from the substrate by at least 10–15 centimetres from flush with the wall. Apply an initial coat of Unisan fibre-reinforced composite mortar (see the technical data sheet) by hand (with stainless steel trowel or putty knife) or with a plastering machine to achieve a thickness of about 1.5 centimetres, leaving the surface sufficiently rough to facilitate the adhesion of the subsequent layer. Alternatively, depending on the structural requirements, mortars of the REPAR line can be used. Place the primed alkaline-resistant fibreglass mesh of the ARMAGLASS STUCTURA line (see the technical data sheet of the selected product), placing it on the still-fresh mortar by passing the Helix Steel AISI 304 connector between the bars of the mesh. After bending the connector, restraining the mesh, apply a second finishing layer of mortar (Unisan or REPAR) at a thickness of about 1.5 centimetres. Product to be purchased as needed. Packaging: Roll of 10 meters UM: €/kg

One space high conjunction grounded-based bike rack, in cold-dip galvanized steel, silver color, no plugs. Upper curve is a patented system designed by ANDRYS Ltd in order to set even the disk brake bikes. This bike rack has been designed to be the connection between art. 1103b and art. 1105b. The horizontal tube has a narrowed diameter in both sides that allows it to fit in a single long bike rack. Perfect to optimize space where needed. SKU:Art. 1101 C-B Size:38.5 x 42 cm h 42 cm Weight:2,5 kg Dimensions:38,5 × 42 × 42 cm

Full length tubular handle Steel structure with 5 compartments Sturdy hinged mechanism Sizes: 45 x 20 x 20h cm This toolbox is ideal for the storage and transport of large and small tools, as well as smaller parts, and its retractable opening allows maximum accessibility saving time and effort.

Anche in questo settore, Metal Leghe è in grado di offrire elevati standard di realizzazione come si richiede in questo genere di processo altamente performante. Al di là della produzione ordinaria, la nostra azienda ha concentrato i suoi sforzi per offrire “centrifugati” che possono raggiungere dimensioni fino a 2 metri di diametro. Tutto questo, garantendo grande competitività per: dimensioni personalizzate massima riduzione dei difetti

Aste Di Perforazione

Leva in acciaio inox con doppio scalpello, gancio e foro per estrarre il chiodo. Codice Prodotto:210

Disponibili con lame sbarbatrice.

GALVANIZED PALLET BOX FOR GAS CYLINDER STORAGE The galvanized cylinder pallet allows the storage of up to 12 cylinders in a vertical position. It is equipped with lifting hooks with cranes and safety stickers already included. To facilitate the loading of the cylinders there is a folding platform in embossed plate. The cylinders are held in place by a bar that can be lifted and locked using a steel pin. Capacity:12 cylinders Dimensions (LxPxH):mm. 1030x860x960 Finish:Hot-dip galvanizing

Elementi base per il riscaldamento elettrico consentono tutti i tipi di trasferimento del calore e vengono realizzati in rame, ferro, acciaio inox, incoloy. La possibilità di ottenere le più svariate forme e dimensioni li rendono adatti a tutti i settori industriali.

We manufacture stamped bent parts and strip springs made of spring steel (according to EN10132-4), stainless steel (according to EN10088 / EN10151), hardened steel, phosphor bronze, copper, brass, and other materials upon request (see images – some examples).

For more than 50 years we have been building ‘RAPID’ series Electric Pumps, with flexible elastomer impeller and AISI 316L stainless steel pump body Maximum Efficiency and Temperature Control in Fluid Transfer The ‘RAPID TERMICA’ series is at the forefront of the fluid transfer sector, integrating the established performance of the ‘RAPID’ series with an innovative temperature control system. Thanks to the presence of a heating and cooling chamber, the RAPID TERMICA series is ideal for handling and transferring products that need to maintain specific temperatures, both hot and cold, throughout the entire transfer process. The main Technical Specifications of the Rapid Termica series stainless steel electric pump The stainless steel heating/cooling chamber surrounds the pump body and for temperature modulation of the liquids present also allows the use of steam. The flexible elastomer impeller, together with the AISI 316L stainless steel pump body machined from solid bar, ensure perfectly smooth, porosity-free and highly corrosion-resistant surfaces Versatility and Regulatory Compliance Impellers are available in a variety of materials, from food-grade white SILICONE and FDA-certified NEOPRENE (CR) to DUTRAL (EPDM) and NITRILE (NBR), to suit the different requirements of the products handled. Each material is chosen to optimise performance in relation to the type of Adaptability, Power and Ease of Maintenance Like all electric pumps in the ‘RAPID’ series, the THERMAL model is equipped with a standard fixed speed motor (1400, 900 or 700 rpm), with the option of a speed variator or servo-ventilated motor for inverter application. These features make the pumps ideal for the gentle transport of dense or viscous products. The series offers models with flow rates ranging from 2,700 to 24,000 litres per hour, providing great versatility for every industrial need. In addition, the ease of disassembly and maintenance simplifies frequent servicing while maintaining operational efficiency. A Reliable Solution for Every Need With its self-priming capacity and reversibility, the ‘RAPID TERMICA’ series stands out for its efficiency and user-friendliness in a wide range of industrial applications. The wheeled version, with full electrical system, reversing switch and emergency button, offers additional mobility and safety. The possibility of customising the connections, from standard hose connections to DIN, GAS, TRI-CLAMP, and flange connections, allows perfect integration into any system. The ‘RAPID TERMICA’ series is the optimal choice for those seeking the ultimate in efficiency, reliability and temperature control in fluid handling and transfer.

NC gear hobbing with standard profiles XL, MXL, T, HTD, GT or special profiles manufactured with special purpose tools. Production of items, which are normally in aluminium, available also in brass, steel or polymer. On request: Galvanic treatments such as anodizing, phosphating, nickel-plating etc… Gear cutting of outer diameters from min. 6mm to approximately 50mm in automatic unmanned mode. Max. Length of parts subject to gear cutting: approximately 100mm. Our company can manufacture small, medium-sized and large productions batches by means of chutes and automatic loaders. We can deliver finished products complete with belt containment flanges.

The mixer with unloading by hatches is completely made of stainless steel and it is formed by a double cradle mixing tank with two mixing shafts with intersecting paddles of the same shapes and dimensions. The tank capacity varies between 1.100, 1.500, 2.000, 3.000, and 4.000 lt., bigger capacity tanks are available upon request. Each mixer is available also in the vacuum versions and with CO2 intake. Generally used to obtain quality productions, they are equipped with an unloading system by sliding hatches located on the tank’s bottom. The system allows a perfect mixing of different components and a rapid unloading. This kind of mixers are mainly used to produce sausages, salami and Italian typical mortadella.

Oleodinamica REVA manufactures appropriate HPUs to be installed in hazardous areas “zone 1 & 2” classified. HPUs are designed and built according to the customer needs. The explosion proof versions are available in full compliance with European directive 2014/34/EU ATEX or with other international standard as IEC or NEC. The most used protection methods are ex-d /e /m / i and Oleodinamica REVA can supply also mixed system i.e. explosion proof + intrinsically safe. • Tanks and stainless steel piping for marine or aggressive environments • Low noise solutions • Watertight constructions or open due to environmental conditions up to -60°C • Tanks with variable capacity depending on the customer needs • Pump units with variable power • Possibility of providing structural calculations of the containment carpentry • Executions all in stainless steel

Frameless Magnetic Boards offer a modern and minimalist design that complements any contemporary space. The absence of a frame allows for seamless integration into any environment, creating a clean and unobtrusive look. These boards are perfect for creating large, continuous writing surfaces by combining multiple panels, making them ideal for collaborative workspaces and creative environments. The magnetic surface is easy to write on and erase, providing a versatile platform for brainstorming, planning, and presenting ideas. Available in various sizes and customizable options, Frameless Magnetic Boards can be tailored to fit any space and design preference. Their sleek appearance and functional design make them a popular choice for offices, schools, and homes looking to enhance their communication and organization capabilities.

La nostra macchina da taglio è progettata per il taglio della lamiera con precisione ed efficienza. Il suo design avanzato consente tagli puliti senza distorsioni, rendendola ideale per varie applicazioni. Questa macchina è adatta sia per operazioni su piccola scala che su larga scala, offrendo versatilità nella produzione. Con la sua costruzione durevole e facile da usare, la macchina da taglio è uno strumento essenziale per qualsiasi officina di lavorazione dei metalli.

Nel reparto produttivo disponiamo un area dedicata alle cernite visive al montaggio manuale e/o in automatico di componenti e prodotti a Disegno tecnico in conto lavoro per il Cliente finale.

Queste pompe con tutte le parti in contatto con il liquido realizzate in acciaio inox e progettate secondo direttive DIN 24255 (UNI EN 733), sono usate per pompare liquidi chimicamente puliti senza parti solide in sospensione in impianti di riscaldamento / condizionamento, sistemi di irrigazione, unità anti incendio etc. La vasta gamma disponibile e la loro affidabiità rendono la pompa utilizzabile in ambiti agricoli, civili ed industriali. Versioni: NX32, NX40, NX50, NX65 Portate: 0 – 2300 lt/min Prevalenze: 0 – 72 mt Potenze: 1,1 – 22 Kw Corpo pompa, giranti e difusori: acciaio inox Aisi 304 (Aisi 316L su richiesta) Albero in acciaio inox Aisi 304 Supporto ed involucro motore: alluminio 2 o 4 poli, di tipo chiuso a ventilazione esterna, classe d’isolamento F, grado di protezione IP55 Aspirazione massima: 7 metri Versioni:NX32, NX40, NX50, NX65 Portate:0 – 2300 lt/min Prevalenze:0 – 72 mt Potenze:1,1 – 22 Kw Aspirazione massima:7 metri

Robusto, funzionale – Con braciere per produrre carbone dalla legna – Sistema di regolazione dell’altezza della griglia. Piani laterali disponibile su richiesta Griglia inox su richiesta

viteria in ergal anodizzata

struttura in multistrato, laccato lucido e parti dell'arredo a vista

Le applicazioni che richiedono l’uso di guarnizioni sono praticamente infinite ogni volta che si vuole evitare la fuoriuscita di un fluido, ogni volta che si vogliono accoppiare due componenti meccanici, ogni volta che si vuole impedire il passaggio di un liquido o di un gas, ogni volta che si ha l’esigenza di isolare un ambiente o una parte di esso una guarnizione può avere un ruolo cruciale. Le guarnizioni possono essere montate all’interno di valvole, pompe, cilindri oleodinamici, presse, compressori, alberi rotanti, apparecchi di misurazione, motori, flange, macchine utensili, carter, elettrodomestici e macchinari industriali di qualsiasi settore. Affinché una guarnizione lavori nel mondo corretto, il materiale con il quale viene realizzata deve presentare delle caratteristiche ben definite deve resistere chimicamente al fluido da contenere, non deve aggredire le superfici con le quali entra in contatto, deve resistere alle pressioni e alle temperature d’esercizio

Per rivestimenti in polvere, elettrostatici per immersione liquida, anodizzazione e platinatura.Ideali per fori passanti. CODICE:CPP10(2) PCS BOX:500

Controllore adattivo da 7'' touch screen. Costruzione di tipo monoscocca. Costruzione interna ed esterna in acciaio inox AISI 304. Abbattitore di tipo Roll-in con rampa a filo porta per l'inserimento di carrelli per teglie GN1/1 o EN 60x40 Guarnizione porta resistente alle temperature minime di raggiungimento. Profili cella e profili porta resistenti alle temperature minime di raggiungimento. Vano tecnico posto sopra la cella. Unità condensatrice posta nel vano tecnico, estraibile e facilmente ispezionabile dal retro. Quadro elettrico posto nel vano dietro al controllore facilmente apribile per ispezioni tecniche. Cella interna con angoli raggiati per facilitare le operazioni di pulizia. Isolamento in poliuretano ad alta densità senza CFC. Evaporatore con protezione antiruggine cataforesi. Cerniera porta lato sinistro. Perimetro porta riscaldato per evitare la formazione di brina. Cicli a sonda: la temperatura della sonda al cuore comanda Capacità abbattimento (+90°C/+3 °C):100 kg Capacità surgelazione (+90°C/-18 °C):78 kg Dimensioni interne (lxpxh) :690 x 815 x 1881 mm Dimensioni esterne (lxpxh):1210 x 1089 x 2393 mm Capacità (litri):1058 L

Connessione diretta alla centrale. Elettronica resinata. Segnalazione acustica e luminosa. DGLP X Policarbonato. DGLI X Acciaio Inox. DGLP (L x W x D): 103 x 81 x 23mm. DGLP FN (L x W x D): 139 x 41 x 23mm. DGLI (L x W x D): 97 x 76 x 20mm. DGLIF (L x W x D): 140 x 35 x 21.5mm. Tecnologia: 125 kHz. Lettore Multi Cards. Montaggio da applicare (ideale porte a vetro). Il DFP è un bi-adesivo per nascondere il retro del lettore quando viene usato su porte a vetro. In questo modo si può utilizzare lo stesso lettore sia in Entrata che in Uscita. Alimentazione:12V dc Assorbimento:100mA

Valvola a sfera in acciaio inox AISI 316-CF8M, filettatura F/F, a passaggio totale. Limiti di temperatura:-20° +160° Vuoto:10-2 torr

Bocchettone di riempimento filettato 2” maschio, da avvitare, saldare su serbatoi o collegare a tubi di carico per carburanti, oli idraulici e altri fluidi. Il sistema di carico è disponibile in differenti lunghezze, materiali e tipologie. A richiesta possiamo fornire versioni con filtro estraibile o fisso, raccordo di ventilazione/sfiato o sistemi di riempimento completi di tubi di carico flessibili. Il bocchettone di riempimento filettato 2” può essere abbinato alle nostre nicchie serie 60 F, ai nostri tappi filettati ALU e ASM.CF o al nostro tappo indicatore di livello meccanico filettato 2″. Il sistema di carico filettato 2” può essere utilizzato in diversi settori, tra cui applicazioni nautiche e ambienti corrosivi per i quali suggeriamo le versioni in acciaio inox.

Porta con anta completamente in cristallo trasparente temperato e stratificato mm. 8+0,76+8. Telaio in ferro rivestito INOX spessore mm. 51, cerniere e maniglia in acciaio INOX. Semiautomatica con ammortizzatore a braccio incorporato nella traversa.